How to Use the SAFEMATE SM1500-AIR Portable Jump Starter | User Guide & Tutorials

VIDEO GUIDES

Video Tutorials

Watch our step-by-step guides to learn how to use your SAFEMATE safely and correctly.

VIDEO 01

How to Jump Start Your Vehicle

Step-by-step Guide

Learn how to connect the smart clamps, power on the SM1500-AIR and safely start your vehicle.

VIDEO 02

How to Use Boost Start Mode

Boost Mode Guide

Learn how to activate Boost Start Mode when the vehicle battery is extremely low or cannot be detected.

VIDEO 03

How to Use the Tire Inflator

Inflation Guide

Connect the air hose, choose a preset or set the pressure manually, and inflate your tires safely.

VIDEO 04

How to Inflate a Basketball

Inflation Guide

Learn how to inflate a basketball, choose basketball inflation mode

VIDEO 05

How to Inflate a Pool Float

Inflation Guide

Recharge your SM1500-AIR correctly so it is ready whenever you need emergency power.

VIDEO 06

How to Turn LED-Flashlight On & Off

LED-Flashlight Guide

Learn how to turn the lights on and off.

VIDEO 07

How to Charge Your Devices

Charging Guide

Learn how to charge your device by SAFEMATE correctly and keep the battery ready for roadside emergencies.

How To Jump Start

Please check the following items before starting.

🔋Charge above 40% before use
🔌Red to (+), Black to (-)
⏱️Crank for 4 sec max, wait 15 sec between tries
Attach Clamps
STEP 1

ATTACH CLAMPS

Connect the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal of your vehicle battery.

Power On
STEP 2

POWER ON

Press the power button and ensure the jump starter is ready before starting the engine.

Start Vehicle
STEP 3

START VEHICLE

Start your vehicle within 30 seconds. Once the engine starts, remove the clamps promptly.

How to Use Boost Start Mode

Boost Start (for a dead battery)

If the display stays blank even after charging, you can boost start:

1

Connect the clamps, double-checking polarity.

2

Turn the unit on, then hold the flashlight button while double-pressing the power button.

3

A click and lit-up "START" screen means you're ready to go.

⚠️ This mode skips reverse-polarity and short-circuit protection, so make sure the clamps are correct before using it.
Attach Clamps
STEP 1

ATTACH CLAMPS

Connect the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal of your vehicle battery.

Power On
STEP 2

POWER ON

While powered on, Press and hold the Flashlight Button, then quickly press the Power Button twice

Start Vehicle
STEP 3

START VEHICLE

Start your vehicle within 30 seconds. Once the engine starts, remove the clamps promptly.

How to Use the Tire Inflator

Pick a preset or set your own pressure, connect the hose, and let it do the work.

🚗Car — 2.5 BAR / 36 PSI
🏍️Motorcycle — 2.4 BAR / 35 PSI
🚲Bicycle — 45 PSI
🏀Basketball — 8 PSI
1

Press the Unit Switch Button to enter inflator mode, then press the Mode Button to choose Car, Motorcycle, Bicycle, Basketball, or Manual (PSI/BAR/KPA/KG/CM²).

2

Presets set the pressure automatically. In Manual mode, use + / – to set your target (up to 150 PSI).

3

Connect the air hose to the tire valve and to the unit's inflation socket.

4

Press the Tire Inflator Button to start. The display shows live pressure, and it stops automatically once your target is reached.

5

Disconnect the hose and store it once you're done.

Auto shut-off at target pressure · Overheat protection above 120°C/248°F · Shows "000" if no sensor is detected

Display Codes & Quick Troubleshooting

If your device displays an error code or behaves abnormally, please refer to the guide below to resolve the issue quickly.

Screen Display What It Means What to Do
START Connection is correct, ready to go. Start your engine normally.
Reversed Clamps are connected backward. Swap the red and black clamps.
Short Circuit Clamps are touching each other or the same metal. Separate the clamps and reattach to the correct terminals.
Too Hot Unit temperature is above 65°C/149°F. Let it cool in a shaded spot for about 20 minutes.
Too Cold Unit temperature is below -30°C/-22°F. Bring it indoors and let it warm up.
Battery Low Unit charge is below 10%. Charge for at least 30 minutes before use.
No Display Vehicle battery is below 0.5V, or unit is asleep. Charge for 5 min and press power, or use Force Start below.

FAQ

Everything you need to know about your SAFEMATE jump starter.

How do I Know If This Jump Starter is Compatible with My Vehicle?
The SM1500-AIR supports gasoline engines up to 8.0L and diesel engines up to 6.0L. If you are unsure about your vehicle's specifications, you can contact us through WhatsApp or Email: service@safematestore.com
Can This Device Jump-Start a Battery with 0V or Extremely Low Voltage?
Yes. This jump starter supports starting batteries with voltage levels ranging from 0V to 12.6V, including dead batteries when using the BOOST START MODE.
Can I Use It in Winter at -20°C?
Yes, absolutely. However, for the best performance in severe cold conditions, we highly recommend warming the unit inside your jacket or near the vehicle heater for several minutes before use. Extreme temperatures naturally reduce lithium battery discharge performance. For your safety, the device features built-in Under-Temperature Protection and automatically shuts down below -30°C (-22°F).
What Kind of Devices Can This Charge?
It functions as a portable power bank capable of rapidly charging(USB-C output:18W):
  • iPhone
  • iPad
  • Android smartphones
  • Tablets
  • Compatible USB-C laptops
making it an ideal emergency power source while traveling.
How Long Can This Device Hold a Charge When Stored in My Car?
Thanks to our advanced low self-discharge technology, this jump starter can retain its charge for up to 24 months. Even though the hardware can easily survive 24 months without a charge, we strongly recommend recharging the battery every three months; this is highly effective in extending the battery's health and lifespan.
Is It Safe to Use? Will It Spark When I Connect the Clamps?
Yes. It is safe and spark-free. The SAFEMATE smart jumper clamps feature advanced Spark-Proof technology. The system automatically prevents:
  • Sparks
  • Short circuits
  • Reverse polarity damage
  • Electrical hazards
providing a safe and worry-free jump-starting experience.
How Can I Jump Start a Dead Battery?
We have BOOST START MODE, While powered on, Press and hold the Flashlight Button, then quickly press the Power Button twice.

Ingresa en

¿Ha olvidado su contraseña?

¿Aún no tienes una cuenta?
Crear una cuenta